Hilti AG 100-7, Operating Instructions Manual

Page: 11 / 17

3 Description
3.1 Use of the product as directed
The power tool is designed for cutting and grinding metals
and mineral materials.
The power tool may be used only for dry cutting or
grinding.
The power tool may be operated only when connected
to a power supply providing a voltage and frequency
in compliance with the information given on its type
identification plate.
Working with metals: Synthetic resin-bonded,
fiber-reinforced grinding or cutting discs.
Working with mineral materials: Cutting and slitting using
the corresponding guard (DC-EX), grinding using the
corresponding guard (DG-EX).
Use only discs (abrasive grinding discs, abrasive cutting
discs, etc.) that are approved for use at a speed of at
least 11500/min, with a maximum thickness of 6.4 mm
(grinding discs) or 2.5 mm (cutting discs) and a diameter
of max.100 mm or, respectively, 115 mm.
Observe the national health and safety requirements.
To avoid the risk of injury, use only genuine Hilti ac-
cessories and insert tools.
The power tool is designed for professional use and may
be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of
any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
3.2 The items supplied in the cardboard box are:
1 Power tool
1 Guard
1 Front cover for the disc guard
1 Side handle
1 Clamping flange
1 Clamping nut
1 Wrench
1 Operating instructions
3.3 DG‑EX 100/4" or DG‑EX 115⁄4.5" dust removal
hood for grinding
2
The tool is suitable only for occasional use with diamond
cup wheels for grinding mineral materials.
CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting
of matched components, i.e. dust removal hood and
a suitable Hilti vacuum cleaner, are used for grinding
mineral materials, such as concrete or stone. These serve
to protect the operator and increase the life of the power
tool and disc used.
3.4 DC‑EX 100 dust removal hood or DC‑EX
115⁄4.5"‑C compact dust removal hood for
cutting
3
For cutting masonry and concrete.
CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting
of matched components, i.e. dust removal hood and a
suitable Hilti vacuum cleaner, are used for cutting and
slitting mineral materials, such as concrete or stone.
These serve to protect the operator and increase the life
of the power tool and disc used.
3.5 Front cover for the disc guard
4
CAUTION
When grinding with straight grinding discs and cutting
with cutting discs in metalworking applications, use
the guard with front cover.
4 Consumables
NOTE
Accessories can be found at your Hilti Center or online at www.hilti.com .
Discs with a max. diameter of 100 mm or, respectively, 115 mm, designed for a speed of 11500/min and a
peripheral speed of 80 m/sec, and with a maximum thickness of 6.4 mm (abrasive grinding discs) or 2.5 mm
(abrasive cutting discs).
Discs Application Designation Material
Abrasive cutting disc Cutting, slitting AC‑D metal
Diamond cutting disc Cutting, slitting DC‑D mineral
Abrasive grinding disc Rough grinding AG‑D, AF‑D, AN‑D metal
en
18
Printed: 19.01.2015 | Doc-Nr: PUB / 5169257 / 000 / 03