Device drawings and connectors
32/75
5.2.2
netHOST for Real-Time Ethernet systems
The following figure depicts LEDs, connectors and control elements of the
netHOST for Real-Time Ethernet systems.
NHST-T100-EN
(1)
Connector for supply voltage (X1)
(2)
Slot for SD memory card
(part number 1719.003)
(3)
Push button without function
(4)
SYS LED (system status)
(5)
APL LED (application status)
(6)
Mini USB service interface
(protected by a cover)
(7)
Protocol specific LED
for PROFINET IO Controller:
SF
for EtherCAT Master:
RUN
for EtherNet/IP Scanner:
MS
(8)
Protocol specific LED
for PROFINET IO Controller:
BF
for EtherCAT Master:
ERR
for EtherNet/IP Scanner:
NS
(9)
LINK LED for Real-Time Ethernet
channel 0
(10)
Real-Time Ethernet interface channel 0
(X2, RJ45 socket)
(11)
ACT LED for Real-Time Ethernet
channel 0 (activity)
(12)
LINK LED for Real-Time Ethernet
channel 1
(13)
Real-Time Ethernet interface channel 1
(X2, RJ45 socket)
(14)
ACT LED for Real-Time Ethernet
channel 1 (activity)
(15)
LINK LED for LAN interface
(16)
LAN interface (X3, RJ45 socket)
(17)
ACT LED for LAN interface (activity)
Table 20: LEDs, connectors and operating elements of netHOST for RTE systems
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018
