hilscher CIFX Series, User Manual

Page: 78 / 299

Device Drawings 78/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
5 Device Drawings
5.1 PC Cards cifX Compact PCI
5.1.1 CIFX 80-RE
L0729012A
11
1
15
25
CH_
A
CH_
B
1
3
CIFX 80-RE
CIFX 80-CO
CIFX 80-DN
CIFX 80-DP
GND
BARCODE LABEL
made in Germany
Hilscher GmbH
AOI
UL
System LED (gelb/grün) / (yellow/green)
Kommunikationsstatus-LED 0 und 1 (rot/grün) /
Communication Status LED 0 and 1 (red/green)
SYS
COM 0
COM 1
Mini-B-USB-Buchse / Mini B USB Plug
(X305, 5-polig / 5 pin )
Ethernet RJ45-Buchse / RJ45 Socket
(X200)
Kanal 0 /
Channel 0
(CH 0)
Kanal 1 /
Channel 1
(CH 1)
Auswurfhebel /
Ejection Lever
Kompakt-PCI-Bus /
Compact PCI Bus
(X1, 135-polig / 135 pin )
SYNC-Anschluss /
SYNC Connector
(X51, 3-polig / 3 pin )
Pi
n 1:
T
X
+
Pin 2:
T
X
-
Pi
n 3:
RX+
P
in 4:
Ter
m
1
Pi
n 5:
T
e
rm
1
P
in 6:
RX-
Pin 7:
T
erm 2
Pi
n 8:
T
e
rm
2
LED
grün / green
LED
gelb / yellow
Figure 3: CIFX 80-RE*
Note: *Device supports Auto Crossover Function. With loaded EtherCAT Master firmware
only the RJ45 channel 0 can be used, channel 1 is deactivated. Beginning with the Ether-
CAT Master firmware version 3 channel 1 can be reactivated if redundancy is activated.
For Open Modbus/TCP with V2.3.4.0 and higher both RJ45 channels can be used.
The figure below shows the front plate of the PC cards CIFX 80-RE:
n Mini B USB Plug (5 pin)
o System LED (yellow/green)
p Status LED COM0 (red/green)
q Status LED COM1 (red/green)
Refer also to chapter, LED Descriptions , page 115.
r Ethernet Interface Channel 0
1
2
3
4
5
6
SYS
COM0
COM1
s Ethernet Interface Channel 1
Refer also to section Ethernet Interface , page 151.
Figure 4: Front Plate CIFX 80-RE