Safety
38/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
2.5.2
Exceeding permissible Signaling Voltage
To avoid device damage due to high signal voltage to your PC card cifX,
you must observe the following instructions. These instructions apply to all
PC cards cifX described in this manual.
•
All I/O signal pins at the PC card cifX tolerate only a specified signaling
voltage!
•
Operation with a signaling voltage other than the specified signaling
voltage may lead to severe damage to the PC card cifX!
The data on the mandatory signaling voltage for the PC cards cifX
described in this manual you find in the section
Interface on page 61. There the required and permitted signaling voltage
is provided by device type.
2.5.3 Electrostatically
sensitive
Devices
This equipment is sensitive to electrostatic discharge, which cause internal
damage and affect normal operation. Therefore adhere to the necessary
safety precautions for components that are vulnerable with electrostatic
discharge if you install or replace your device. Follow the guidelines listed
hereafter when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on the PC Card cifX.
•
Do not touch circuit components inside the equipment.
•
If available, use a static-safe workstation.
•
When not in use, store the equipment in appropriate static-safe
packaging.
Reference Safety [S3]
