Technical data
31/48
Category
Parameter
Value
Device
Dimensions (L x W x H)
30 x 22 x 7.0 mm
Component heights
The component height on the top of the basic card CIFX
M223090AE exceeds the height of 1.5 mm specified by the
standard, because the height of the cable connectors
(Ethernet X801, or fieldbus X802), including the cable, is
approximately 8.5 mm above the circuit board.
The component height on the bottom of the basic card
CIFX M223090AE complies with the standard
specifications.
Host system
Note:
The basic card CIFX M223090AE uses an ASIX
Ax99100. Therefore, the PC card CIFX M223090AE-CO\F
can only be operated with a PCIe host controller that
supports accesses to the IO area of the card (IOBAR).
Mounting/installation
PCI Express slot (3.3 V), for M.2 type 2230-D3,
Dual key A-E (Socket 1 Connectivity)
CE sign
CE sign
Yes
Emission
DIN EN 61000-6-3:2011-09 + Cor. 1:2012-11,EN
61000-6-3:2007 + A1:2011
Immunity
DIN EN 61000-6-2:2006-03 + Cor. 1:2011-06
EN 61000-6-2:2005
Documentation to prove the
restriction of hazardous
substances
EN 50581:2012
RoHS
Yes
Firmware and
configuration download
Software to download and update
the firmware and configuration
Device Explorer
Configuration
Configuration software
Communication Studio
Table 27: Technical data CIFX M223090AE-CO\F
7.2
PCI identifiers on the PCI Express M.2 bus
The PC card CIFX M223090AE-CO\F is a multifunctional device at the PCI
Express M.2 bus and requires two PCI identifiers. The following identifiers
are valid:
PCI identifier
Value
Vendor ID
0x15CF
Device ID
0x0090
Subsystem vendor ID
0x15CF
Subsystem device ID
0x6001 (Flash-based device,
SPM)
0x1002 (interrupt source, SPM)
Table 28: PCI identifiers on the PCI Express M.2 bus
CIFX M223090AE-CO\F | Hardware description and installation
DOC210203UM02EN | Revision 2 | English | 2021-09 | Released | Public
© Hilscher 2021