hilscher CIFX M223090AE-CO/F, User Manual

Page: 20 / 48

Installing the hardware 20/48
Figure 4: Connect the cable to the detached network interface CANopen AIFX-V2-CO
Ø Then plug the cable into the cable connector fieldbus X802 on the basic
card.
Figure 5: Connecting cable to the basic card, example CIFX M223090AE
Ø
Close the housing of the PC or connecting device again.
4.5 Loading firmware and configuration in the device or making
an update
Ø Download the firmware from the Hilscher website and save the firmware
on the local hard disk of your PC.
Ø
If necessary, transfer the configuration to the PC. You create the
configuration using a suitable configuration software.
Ø
Use Device Explorer to load the firmware and configuration into the
device or update the firmware and configuration in your device.
Ø When downloading the firmware and configuration to your device or
when performing an update, follow the instructions in the "Device
Explorer" operating instruction manual.
For the "Device Explorer" operating instruction manual, see section
References [
}
page 37].
CIFX M223090AE-CO\F | Hardware description and installation
DOC210203UM02EN | Revision 2 | English | 2021-09 | Released | Public © Hilscher 2021