hilscher CIFX 100EH-RE\CUBE, User Manual

Page: 29 / 223

Descriptions and Requirements 29/223
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM46EN | Revision 46 | English | 2015-12 | Relelased | Public
© Hilscher, 2008-2015
3.5 The Function „Slot Number (Card ID)“
Device revisions equipped with a
Rotary Switch Slot Number (Card ID)
are listed separately in section Hardware: PC Cards cifX on page 10 in
Table 2 .
The
Slot Number (Card ID)
must be set at the PC card cifX using the
Rotary Switch Slot Number (Card ID)
. The
Slot Number (Card ID)
will
serve to distinguish PC cards cifX from each other clearly, especially if
several PC cards cifX are installed into the very same PC. The application
program requests the
Slot Number (Card ID)
from the PC card cifX via the
cifX Device Driver
.
For further information refer to section Rotary Switch for Slot Number
(Card ID) on page 110.
Requirements
For the application program is able to identify a PC card cifX via its
Slot
Number (Card ID)
explicitly and to distinguish it from other PC cards cifX in
the PC, for device revisions equipped with a
Rotary Switch for Slot
Number (Card ID)
the required versions of the firmware, the driver, the
bootloader and the SYCON.net setup must be used:
PC Cards with one Channel:
PC Card cifX From Hardware
Revision
Firmware File Protocol From Firmware
Version
CIFXECM.NXF EtherCAT Master 2.4.3.x
CIFXECS.NXF EtherCAT Slave 2.5.5.x
CIFXEIM.NXF EtherNet/IP Scanner 2.2.1.x
CIFXEIS.NXF EtherNet/IP Adapter 2.3.29.x
CIFXOMB.NXF Open-Modbus/TCP 2.3.3.0
CIFXPLS.NXF POWERLINK Controlled Node 2.1.19.x
CIFXPNM.NXF PROFINET IO Controller 2.3.x.x
CIFXPNS.NXF PROFINET IO Device 3.3.6.x (V3)
CIFXS3M.NXF sercos Master 2.0.9.0
CIFXS3S.NXF sercos Slave 3.0.8.0
CIFX 50-RE,
CIFX 50-RE\ET,
CIFX 50E-RE,
CIFX 50E-RE\ET,
CIFX 70E-RE,
CIFX 70E-RE\MR,
CIFX 100EH-
RE\CUBE 3
1
4
1
1
1
1
CIFXVRS.NXF VARAN Client 1.0.x.x
CIFXDPM.NXF PROFIBUS DP Master 2.3.x.x
CIFXDPS.NXF PROFIBUS DP Slave 2.3.x.x
CIFX 50-DP,
CIFX 50E-DP,
CIFX 70E-DP,
CIFX 70E-DP\MR 5
5
1
1
CIFXMPI.NXF PROFIBUS MPI Device 2.2.5.0
CIFXCOM.NXF CANopen Master 2.3.x.x CIFX 50-CO,
CIFX 50E-CO,
CIFX 70E-CO,
CIFX 70E-CO\MR 5
4
1
1
CIFXCOS.NXF CANopen Slave 2.3.x.x
CIFXDNM.NXF DeviceNet Master 2.2.x.x CIFX 50-DN,
CIFX 50E-DN,
CIFX 70E-DN,
CIFX 70E-DN\MR 5
4
1
1
CIFXDNS.NXF DeviceNet Slave 2.2.x.x
CIFX 50-CC,
CIFX 50E-CC 2
2 CIFXCPS.NXF CC-Link Slave 2.4.x.x
Table 15: Firmware Versions for the Function Slot Number (Card I), (for 1 Channel Systems)