Hillyard TRIDENT R26SC PRO, Use And Maintenance Manual

Page: 8 / 84

ENGLISH
SERIAL NUMBER PLATE
The serial number plate is located at the rear of the steering column, and indicates the machine's
general characteristics, including its serial number. The serial number is a very important piece of
information and should always be provided together with any request for assistance or when
purchasing spare parts. The serial number plate contains the following:
1. The weight of the batteries used to power the appliance (value expressed in kg/lbs).
2. The IP protection rating of the appliance.
3. The gross weight of the appliance (expressed in kg/lbs).
4. The identification code of the appliance.
5. The serial number of the appliance.
6. The name of the appliance.
7. The nominal power consumed by the appliance (expressed in W).
8. The maximum grade that the appliance can handle during work activities (expressed in %).
9. The year in which the appliance was manufactured.
10. The nominal voltage of the appliance (expressed in V).
11. The commercial name of the appliance and the manufacturer's address.
11
10
9
8
7
6
1
2
3
4
5
Remarks:
(1) Machine weight: refers to the overall weight of the machine, without the batteries or the operator on board, and with both tanks empty.
(2) Machine weight during transport: refers to the overall weight of the machine with the batteries on board, without the operator on board, and with both tanks empty.
(3) Machine weight during work operations: refers to the overall machine weight with the batteries, with the solution tank full, but with the recovery tank empty and with the weight of the operator on-board
(theoretical weight of 75kg).
8
TECHNICAL DATA
U/M
[U.S.C.U.]
TRIDENT
R26SC Pro
Rated machine power W 1722
Working capacity up to sq.
ft
/h 24488
Working width in 25,5
Squeegee width in 30,79
Central brush head brushes (number -Ø external bristles) No. / in 2 - 13,39
Rpm of the individual brush on the central brush head rpm 140
Electrical characteristics of the brush head motor V / W 24 - 500
Weight exerted on the brush head lb 88 ÷ 132
Electrical characteristics of the traction motor V / W 24 - 300
Gradeability (“TRANSFER” working program, weight of machine in transport with operator on board) % 17
Maximum forward movement speed (“TRANSFER” working program, weight of machine in transport with operator on board) mph 3,5
Electrical characteristics of the suction motor V / W 24 - 422
Vacuum on vacuum head mbar 101
Maximum solution tank capacity gal 14
Maximum recovery tank capacity gal 14,5
Solution tank maximum capacity (versions with HDC system) gal 0,8
Turning circle in 30,12
Turning space for U-turn in 71,85
Machine dimensions (length - width without squeegee - height) in 50,59 - 27,95 - 46,85
Machine dimensions (length - width with squeegee - height) in 50,59 - 30,71 - 46,85
Single battery compartment dimension (useful length - width - height) in 13,78 - 7,48 - 12,2
Number of batteries - Recommended nominal voltage rating of the battery N - (V - AhC5) 2 - (12 - 112)
Maximum battery weight (recommended) lb 86
Machine weight
(1)
lb 381
Machine weight during transport
(2)
lb 553
Weight of the machine ready for use
(3)
lb 860
Sound pressure on the operator's ears (ISO 11201, ISO 4871, EN 60335-2-72) (L
pA
) dB (A) 64,8
Uncertainty K
pa
dB (A) 1,5
Vibration level on the operator's arms (ISO 5349-1, EN 60335-2-72) m/s
2
0,62
Vibration level on the operator's body (ISO 5349-1, EN 60335-2-72) m/s
2
0,47
Vibration measurement uncertainty 1,5%