
Part 3 - Configuration
52
Stream
Configure the camera's live and recording resolution,
encode, picture quality, transfer speed, and ips speed
settings.
• Camera Channels: It's possible to configure a unique
video profile for each camera.
•
: Apply the video profile settings of the camera
selected under Camera Channel to a different camera.
• Live/Remote Video Profile: Check the current Live
video picture quality and edit remote video profile
settings.
- Use Dynamic Remote Stream: Automatically
transmits the Live 1 (Single Screen), Live 2 (2x2), or
Remote (greater than 2x2) stream, depending on
the remote program's live screen layout.
• Record Video Profile: Set up 4 recording quality
profiles.
• Video Profile: Select Live 1, Live 2, Remote, or
Custom (available from Record Video Profile only).
Live 1 and Live 2 allows the user to change Bitrate
and Quality settings only and configures the
remaining settings automatically.
- Encode: Supports H.264.
- Resolution: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected video profile.
- Quality: Select Very High, High, Standard, or Low.
You can assign different Quality settings to different
cameras.
- Bitrate: Select CBR or VBR. Transmitted data size
is fixed with CBR but varies depending on the
amount of movements in the images with VBR.
- ips: Select a value between 1 and 30. Maximum ips
is determined automatically based on the selected
video profile.
Audio
Configure audio recording settings for all cameras
simultaneously.
• Audio Codec: Select an audio codec. (G.711 u-Law,
G.711 a-Law, or G.726)
• Audio In: Select an audio input source (microphone
or line-in) and then adjust the volume.
• Audio Out: Adjust the volume.
Cameras do not feature built-in audio amplifier units
and therefore require the user to purchase a speaker
system with a built-in amplifier separately.