Hills PACOM StIP-16PDX User Manual Download

Page: 30 / 97

Part 2 - Getting Started

Live Mode

Live Menu

Press the

Setup

button while in Live mode to bring up the Live menu on the top of the screen. Press

Setup

once

more to hide the menu. Use the Arrow buttons on the front panel of the NVR or the remote control to select the menu
options.

5 6 7 8

9 0

! @

Layout

Previous Group,
Next Group

Display

Freeze

Alarm

Panic Recording

Sequence

Select Camera

Search Mode

Setup

Wizard

Status Indication

Placing the mouse pointer near the top portion of the screen also displays the Live menu.

Login/Logout

Log into and out from accounts. If in the logged in
state, the account ID is shown. If in the logged out
state, the login icon is shown.

Layout

Used to change the screen layout to single screen,
corridor format, 2x2, 1+5, 1+7, 3x3, 4x4, 5x5, or 6x6.
In order to use the corridor format feature,

Corridor

Format

(Display Setup - Main monitor - Use Corridor

Format) must first be enabled.

The 32-channel model does not support the
corridor format feature.

Previous/Next Group

Loads the previous/next screen group.

Display

•

OSD

(On Screen Display): Enables/disables the

OSD

feature.

•

Full

: Displays the video in full screen mode.

•

Aspect Ratio

: Select whether to enable the

original aspect ratio of video transmitted from the
camera.

Freeze

Freezes the screen. Select

Freeze

again to unfreeze.

Alarm

Pressing this button while the alarm has been
activated resets all NVR outputs, including the built-
in buzzer.

Panic Recording

Activates/deactivates Panic Recording.

Sequence

Initiates

Sequence

in the same manner as pressing

the

SEQUENCE

button while in Live mode. To exit,

select

Sequence

once more or press the

SEQUENCE

button on the remote control. The

icon is

displayed on the upper right part of the screen while
Sequence is in progress.

Summary of Contents for PACOM StIP-16PDX


































































































Search results

Summary of Contents for PACOM StIP-16PDX

Reviews:

Related manuals for PACOM StIP-16PDX

Brands by name

Popular brands

Hills PACOM StIP-16PDX, User Manual

Search results

Summary of Contents for PACOM StIP-16PDX

Reviews:

Related manuals for PACOM StIP-16PDX

Brands by name

Popular brands