7
Line Tensioning
Pull line out of arm.
Remove line from under locking lip.
Pull line out from tensioner.
Starting at the furthest arm from the tensioning
arm, pull the line tight and move from arm to arm to
generate desired line tension.
Step 1
Step 3
Step 2
Step 4
Keeping the tension on the line, feed it back through
the tensioner. Pull to retain tension.
Feed line back into arm through central hole. Cut off
excessive line if required prior to putting into arm.
Swing the line back under the tensioner lip to secure.
TIP:
Keep pressure on bottom left edge to stop
tension loss.
Step 5
Step 7
Step 6
Step 8
Push line firmly into arm to give a flush result.
Step 5 (continued)
