
Standard Features
33
IV Pole
The Advanta™ Bed comes equipped with one IV pole,
stored at the head end of the bed beneath the
articulating frame, and four standard IV pole sockets.
The IV pole sockets are located at each corner of the
bed at the head and foot sections.
NOTE:
When not in use, the IV pole should be secured in the
storage area.
Location: At the head end of the bed, under the
articulating frame section.
To Deploy:
Using the Head Up control, raise the
head end of the bed, and remove the
IV pole from the holders. Insert the pole
into the desired socket, and turn
clockwise until it drops fully into the
socket and locks into place.
To Store:
Turn the IV pole counterclockwise, and lift it from the socket. Store it at the head end of the bed.
CAUTION:
Do not exceed the 25 lb (11 kg) weight capacity of the IV pole.
CAUTION:
When lowering the upper section of an IV pole, always grasp and hold the upper section of the pole before
pulling the release knob.
NOTE:
Added height is recommended for gravity drain applications.
Power Cord
The power cord is located at the head end of the bed.
When not in use, it can be stored by wrapping it around
the power cord holders.
IV Pole
Power Cord Storage