Caregiver Controls
12
To Activate: Press and hold the Chair In key to place the bed in the chair position.
Press and hold the Chair Out key to place the bed in the flat position.
NOTE:
The head, knee, and hilow functions may be used to articulate the bed out of the chair position. However,
once the hilow function has been activated, the Chair Out function may not operate as described above.
WARNING:
To prevent personal injury, do not transport patients when the Advanta™ Bed is in the chair position.
WARNING:
Check periodically to ensure that the patient remains properly positioned. The use of pillows can help maintain
side-to-side positioning.
WARNING:
For large patients or patients at risk for skin breakdown, use the Chair Out control to tilt the chair back some
after attaining the chair position. This helps to optimize the interface pressure performance.
Siderail Back Lighting
The siderail back lights illuminate the controls and
make the switches more visible in dim light. The back
lighting can be turned on or off at the footboard control
panel.
Location: Footboard control panel.
To Activate: Press and release the Back Light key
to turn on or off the siderail backlighting.
NOTE:
The back light on the Nurse Call siderail control cannot be turned off.
NOTE:
When the green indicator light on the Back Light key is on, the function is active.
Night Light
The night light is located on the bottom center of the bed frame. An
adjustable light sensor can be set to turn the night light on when light in the
room reaches a predetermined level of dimness.
Location: Footboard control panel.
To Activate: Press and release the Night Light key to turn on or off the
night light.
Advanta™ Bed Siderail (Patient Side)
Back Light Key
Night Light
