manualshive.com logo in svg

Hill-Rom Volara PVL1, User Manual

Share
Download
Hill-Rom Volara PVL1 User Manual Download Page 56

48

Volara™ System, Model PVL1 User Manual (196286 REV C) 

Device Settings

E

NABLE OR 

D

ISABLE 

C

LINICAL 

A

CCESS

Clinical Access allows facility-authorized persons to access and configure 
these advanced features:

•

Adjustment of the maximum pressure ceiling setting available to the 
user.

•

Modification of the preset therapy settings.

•

Import of the device settings

•

Set up and pairing of Bluetooth® devices, such as a barcode reader or 
pulse oximeter

•

Upgrade of the system firmware (See the service manual for details.).

NOTE:

Import of the Health Level 7 (HL7) standard file

1.

Press 

Device,

 and press 

Controls

.

2.

Slide the setting for 

Clinical Access

 to 

ON

. 

•

To disable, slide the setting to 

OFF

. 

The user will not be able to access 
the manual modes or modify the 
preset therapy plans.

3.

Enter the key code, and press 

Enter

. If 

applicable, contact your facility 
administrator to get the key code.

4.

When complete, press the 

Home

 menu 

control to exit.

196654__C_2019-Apr-29_Cleaned

Summary of Contents for Volara PVL1





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands