Hill-Rom VersaCare P3200 Service Manual Download Page 111

Page: 111 / 379

2.64 Visual Inspection—IntelliDrive® Transport System

Chapter 2: Troubleshooting Procedures

2.64 Visual Inspection—IntelliDrive® Transport System

Tools required:

Flashlight

Inspection mirror

1. Check the unit for external damage.

Using the mirror and flashlight, check for debris around the pulleys and

levers.

3. Check the belt for damage and proper engagement on the pulleys.

4. Remove the drive unit cover.

5. Inspect the links and levers in the motor area for damage.

6. Remove the drive mechanism cover.

7. Check the tension on the drive belt.

8. Check overall condition of all components in the drive box.

9. Install the drive unit cover.

VersaCare™ Bed Service Manual (MAN333 REV 2)

Page 2 - 77

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Search results

Summary of Contents for VersaCare P3200

Reviews:

Brands by name

Popular brands

Hill-Rom VersaCare P3200, Service Manual

Search results

Summary of Contents for VersaCare P3200

Reviews:

Brands by name

Popular brands