Hill-Rom TotalCare P1830A, Service Manual, Page: 28 / 92

Bed Not Level
Chapter 2: Troubleshooting Procedures
Page 2 - 4 TotalCare® Bariatric Bed Service Manual (man299ra)
Bed Not Level
1. Place and angle indicator on the weigh frame and check the head to foot
angle. Is the angle more than 3°?
Yes No
↓ →
No further action required.
2. Inspect the bed frame for bent frame components. Are there any bent frame
components?
Yes No
↓ →
Go to step 5.
3. Replace bent frame components. Does this fix the condition?
Yes No
↓ →
Go to step 5.
4. Go to “Function Checks” in the TotalCare® Bed System Service Manual
(man112) .
5. Inspect the hydraulic cylinder pins for being bent. Are there any bent pins?
Yes No
↓ →
Go to step 8.
6. Replace the bent pins. Does this fix the conditions?
Yes No
↓ →
Go to step 8.
7. Go to “Function Checks” in the TotalCare® Bed System Service Manual
(man112) .
8. Inspect the casters for bent caster stems. Are the caster stems bent?
Yes No
↓ →
Go to step 11.
9. Replace the casters. Does this fix the condition?
Yes No
↓ →
Go to step 11.
10. Go to “Function Checks” in the TotalCare® Bed System Service Manual
(man112) .
11. Call Hill-Rom Technical Support at (800) 445-3720 for technical
assistance.