Hill-Rom RESIDENT P872, Service Manual, Page: 69 / 178

2.9 Automatic Contour Malfunction
Chapter 2: Troubleshooting Procedures
RESIDENT® Low Bed Service Manual (man259) Page 2 - 39
2
2.9 Automatic Contour Malfunction
1. The unit is plugged into an appropriate power source.
Yes No
↓ →
Plug the unit into an appropriate power source. If this solves the
problem, go the “Final Actions” on page 2-16. If not, go to step
2.
2. All lockout controls on the electrical control/lockout box at the head of the
bed are in the unlocked position (i.e., the buttons are out).
Yes No
↓ →
Move all lockout controls to the unlocked position. If this solves
the problem, go to “Final Actions” on page 2-16. If not, go to
step 3.
3. Press the head up (A) and head down (B) buttons on the hand pendant, and
listen for a click (see figure 2-18 on page 2-39).
Figure 2-18. Hand Pendant
You hear a click each time you press the head up (A) or head down (B)
button.
m259_013