Hill-Rom RESIDENT P872, Service Manual, Page: 66 / 178

2.8 Hilow Actuator Malfunction
Chapter 2: Troubleshooting Procedures
Page 2 - 36 RESIDENT® Low Bed Service Manual (man259)
2.8 Hilow Actuator Malfunction
1. The unit is plugged into an appropriate power source.
Yes No
↓ →
Plug the unit into an appropriate power source. If this solves the
problem, go the “Final Actions” on page 2-16.
2. The hilow lockout button on the electrical control/lockout box at the foot of
the bed is in the unlocked position (i.e., the button is out).
Yes No
↓ →
Move the hilow lockout button to the unlocked position (i.e., the
button is out). If this solves the problem, go to “Final Actions”
on page 2-16. If not, go to step 3.
3. Press the hilow up (A) then the hilow down (B) buttons on the hand
pendant, and listen for a click (see figure 2-16 on page 2-36).
Figure 2-16. Hand Pendant
You hear a click each time you press the hilow up (A) or hilow down (B)
button.
m259_015