Hill-Rom RESIDENT P872, Service Manual, Page: 54 / 178

2.4 Siderail Controls Malfunction
Chapter 2: Troubleshooting Procedures
Page 2 - 24 RESIDENT® Low Bed Service Manual (man259)
Figure 2-10. Siderail Control Plug Connection to the Junction Box
4. Replace the siderail (A) with the non-working function button (refer to
procedure 4.4).
This solves the problem.
Yes No
↓ →
Go to step 6.
5. Go to “Final Actions” on page 2-16.
NOTE:
Siderail control plugs are interchangeable. When checking the connection of
the plugs, check both.
6. Check the siderail control plug (B) connection to the junction box (C).
The siderail plug (B) is securely attached to the junction box (C).
Yes No
↓ →
Securely attach the siderail control plug (B) to the junction box
(C), and test the siderail controls. If this solves the problem, go
to “Final Actions” on page 2-16. Otherwise, go to step 8.
7. Go to “Final Actions” on page 2-16.
m259_011