manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 133 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 133

4.15  Automatic Contour Assembly

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 45

4

Figure 4-18.  Automatic Contour Control Assembly

8. Remove the two screws (E), and lift the cover (F) from the automatic 

contour control assembly (G).

9. Remove the two screws (H) that hold the automatic contour control 

assembly (G) to the frame.

Replacement

1. Align the mounting holes in the bottom of the automatic contour control 

assembly (G) with the mounting holes on the frame.

2. Insert the two screws (H) to secure the automatic contour control assembly 

(G) to the frame.

3. Place the cover (F) on the automatic contour control assembly (G), and 

secure it with two screws (E).

4. Insert the automatic contour plug (C) into the junction box (D).

5. Place the seat pan (B) in position on the frame (see figure 4-17 on page 

4-44).

m259_045

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments