manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 126 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 126

4.13  Knee Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 38

RESIDENT® Low Bed Service Manual (man259)

Figure 4-15.  Knee Actuator Motor Frame Connection

7. Note the knee actuator (C) cable routing, and cut the cable ties (D) that 

secure the knee actuator (C) cable to the bed frame.

WARNING:

If the head and/or knee section cannot be lowered to the full flat 
position, brace the section securely to prevent sudden collapse when 
the support of the actuator motor is removed. Failure to do so could 
result in serious personal injury.

8. If necessary, brace the head and knee sections in their raised position.

9. Remove the rue ring (E) that secures the knee actuator (C) motor to the 

frame support bracket.

10. Support the knee actuator (C) motor, and remove the clevis pin (F).

11. Lower the knee actuator (C) motor, and let it rest on the floor.

12. Remove the rue ring (G) and clevis pin (H) that secure the tip of the knee 

actuator (C) rod to the knee section support brace (I).

m259_042

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments