manualshive.com logo in svg

Hill-Rom RESIDENT P872, Service Manual, Page: 123 / 178

Share
Download
Hill-Rom RESIDENT P872 Service Manual Download Page 123

4.12  Head Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 35

4

Figure 4-14.  Head Actuator Motor Frame Connection

7. Note the head actuator (C) cable routing, and cut the cable ties (D) that 

secure the head actuator (C) cable to the bed frame.

WARNING:

If the head and/or knee section cannot be lowered to its full flat position, 
brace the section securely so it does not collapse suddenly when the 
support of the actuator motor is removed. Failure to do so could result 
in serious personal injury.

8. If necessary, brace the head section in its raised position.

9. Remove the rue ring (E) that secures the head actuator (C) motor to the 

frame support bracket.

10. Support the head actuator (C) motor, and remove the clevis pin (F).

11. Lower the head actuator (C) motor, and let it rest on the floor.

12. Remove the rue ring (G) and clevis pin (H) that secure the tip of the head 

actuator (C) rod to the head section support brace (I).

m259_041

Summary of Contents for RESIDENT P872



















































































































































































Reviews:

No comments