Hill-Rom CarePorter P3000, Service Manual

Page: 88 / 220

4.7 Powered Equipment Shelf Rocker Switch
Chapter 4: Removal, Replacement, and Adjustment Procedures
CarePorter™ Cart Service Manual (man239) Page 4 - 25
4
Figure 4-8. Rocker Switch Removal
6. Pull the rocker switch faceplate (B) and rocker switch (C) out of the
opening in the device mount weldment (D).
7. Disconnect the three color-coded wires (E) from the rocker switch (C).
8. Note the color, orientation, and location of the color-coded wires (E).
9. Depress the lock tabs (F) on the top and bottom of the rocker switch (C).
10. Remove the rocker switch (C) from the rocker switch faceplate (B).
Replacement
to install the replacement rocker switch (C), reverse the removal procedure.
Adjustment
No adjustment is required for the rocker switch (C).
m239_048