Hill-Rom CarePorter P3000, Service Manual

Page: 82 / 220

4.5 Printed Circuit Board Fuse
Chapter 4: Removal, Replacement, and Adjustment Procedures
CarePorter™ Cart Service Manual (man239) Page 4 - 19
4
Figure 4-6. Printed Circuit Board Fuse Location
6. Remove the shelf cover (B) from the CarePorter™ Cart (D).
7. Using the phillips head screwdriver, remove the four screws (E) that secure
the printed circuit board cover (F) to the shelf carriage weldment (C).
8. Remove the printed circuit board cover (F) from the CarePorter™ Cart (D).
9. Locate the high voltage fuse (H) on the printed circuit board (G)
10. Carefully remove the fuse cover (I).
11. Carefully remove the high voltage fuse (H) from the fuse bracket (J).
Replacement
To install the replacement high voltage fuse (H), reverse the removal
procedure.
m239_068