Hill-Rom CareAssist P1170, Service Manual

Page: 23 / 197

Standard Features
Chapter 1: Introduction
CareAssist™ Bed Service Manual (man330) Page 1 - 9
1
Bed Flat Control
The Bed Flat control, located on the head siderails, only returns
the sleep deck to a flat position, it does not change the angle of
the bed.
To Activate
Press and hold the Bed Flat control. When all sections are flat, the system
stops.
Dining Chair™ Position
The Dining Chair™ Position controls are located on the outside of the head
siderails. When activated, the bed will articulate to a maximum of 65° for the
head section, 20° for the knee section, and -23° for the foot section.
To Activate
• Set the brake.
• Press the Dining Chair™
Position control. The sleep deck
transitions to the chair position.
To Return to Flat Position
• Press the Bed Flat control. The
sleep deck returns to the flat
position.
• Press the Trendelenburg control.
The bed frame to the level
position.
m330_038
m330_087
m330_037