Hill-Rom Advanta P1600, Service Manual

Page: 390 / 429

Component Handling
Chapter 6: General Procedures
Page 6 - 6 Advanta™ Bed Service Manual (man168ra)
Cleaning Hard to Clean Spots
To remove difficult spots or stains, we recommend that you use standard
household cleansers and a soft-bristled brush. To loosen heavy, dried-on soil,
you may first need to saturate the spot.
Disinfecting
When there is visible soilage and between patients, we recommend that you
disinfect the unit with a tuberculocidal disinfectant. (For customers in the US,
the disinfectant should be registered with the Environmental Protection
Agency.)
Dilute the disinfectant according to the manufacturer’s instructions.
Component Handling
CAUTION:
To prevent component damage, ensure that your hands are clean and
only handle the P.C. boards by their edges.
CAUTION:
When handling electronic components, wear an antistatic strap . Failure
to do so, could result in component damage.
CAUTION:
For shipping and storage, place the removed P.C. board in an anti-
static protective bag. Equipment damage can occur.
P.C. Boards
When servicing P.C. boards, follow good handling practices . Mishandling can
cause the following:
• P.C. boards damage
• Shortened P.C. board life
• Unit malfunctions