Wiegand Camera
·
Operation Manual
8
Go to
Configuration
->
System Settings
->
Wiegand
to enable wiegand transfer and select
protocol type.
Figure 3-6
Wiegand Configuration Interface
2.
For the steps to enable Vehicle Detection and Blocklist &Allowlist Configuration,
please see 3.1.2 Configuration.
Note:
When importing the plates’ list.
-
The Card No. is required, and cannot larger than 10 digits.
-
10000 license plates are supported in allowlist and blocklist in total.
-
Make sure there are no repeated plate number and/or Card No. in the list.
3.3
SHA-1 26bit
3.3.1
Protocol Standard
The Wiegand interface directly transmits the license plate number, and performs a hash
operation on the license plate number.
The 24 bits are taken through the Wiegand standard interface, and an even parity bit
and an odd parity bit are added before and after the 24 bits respectively according to
the standard 26 bit protocol. The result will be sent to Wiegand access control (third
parties like Paxton or Salto) equipment.
Compatible directly with access control system and platform of Paxton in the UK and
Salto in Europe.
Card No. Encoding Mode:
