30
3.
Fix the junction box body to the ceiling according to the
template with the supplied screws.
4.
Combine the junction box cover with the junction box body
Junction Box Body
Junction Box Body
Junction Box Cover
Figure 2. 25
Fix the Junction Box
5.
Attach the mounting base to the junction box and secure
them with supplied screws.
6.
Repeat steps 5 to 7 of the 2.3.1 Ceiling Mounting to install
the camera to the junction box.
2.3.3
Wall Mounting
Note:
You need to purchase a wall mounting bracket separately if you
adopt the wall mounting.
Steps:
1.
Drill 4 screw holes in the wall according to the holes of the
bracket.
2.
Attach the bracket to the wall by aligning the 4 screw holes of
the bracket with expansion screws on the wall.
3.
Secure the bracket with 4 hex nuts and washers.
