HD-TVI Speed Dome User Manual
9
model, address, protocol, etc. The information shown on this submenu is similar to the system
information shown after the power-up action. Please refer to Section 2.1 for more details.
Enter the system information display menu:
MAIN MENUS > SYSTEM INFO
SYS INFO
XX-XXXXX-X
ADDRESS 0
COM FORMAT 2400,8,1
PROTOCOL SELF ADAPTIVE
VERSION 1.00
HARDVERSION 1.00
BUILD DATE 16 11 04
BACK EXIT
SYS INFO
CAM VERSION X.XX
PARAM DATE X XX XX
TEMPERATURE 38
TRACK X.XX
TRACKBUILDTIM 161130
BACK EXIT
Figure 3-3
System Information
Information on this menu cannot be edited.
The temperature refers to the internal temperature of the speed dome.
3.2.2
Configuring System Parameters
Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc.
on the system information settings menu.
MAIN MENUS > DOME SETTINGS > SYSTEM INFO SETTINGS
SYSTEM INFO SETTINGS
SOFT ADDRESS 1
SOFT ADDR ACT OFF
SOFT BAUD 2400
SOFT BAUD ACT OFF
BROADCAST ADDR ON
PELCO CHECKSUM ON
SYSTEM TIME
BACK EXIT
SYSTEM INFO SETTINGS
ZERO ANGLE
<DISPLAY SETTINGS>
HEAT CONTROL TEMP
FAN CONTROL TEMP
EIS FUNCTION OFF
EIS LEVEL N/A
PRESET FOCUS OFF
BACK EXIT
SYSTEM INFO SETTINGS
PROTOCOL STATUS OFF
PROTOCOL AUTO MATCH
485 CHECK AUTO
POWER MEMORY 180S
COAXITION ACTIVE ON
PROTOCOL-C HIK-C
BACK EXIT
Figure 3-4
System Information Settings
You can click the left and right direction buttons in the PTZ control panel via the web browser of
the encoder to enter the next page and return to the previous page of the submenu if more
than one page is available.