2. Select device event or door event.
3. Click to enable or disable Notify Security Center for event.
Note
Send an exception or alarm signal to the remote management software when an event occurs.
8.6.13 Access Control Settings
Set Authentication Parameters
Click Configuration → Access Control → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Figure 8-10 Set Authentication Parameters
Terminal
Terminal description is read-only.
Continuous Face Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Note
The interval ranges from 1 s to 10 s.
Click Save to save the settings after the configuration.
Set Door Parameters
Click Configuration → Access Control → Door Parameters .
Door No.
Select the device corresponded door No.
Door Name
Video Intercom Villa Door Station User Manual
57