Thermal Driving Assistance System
|
User Manual
14
2.
Connect the display with the cigar light to power on the
display.
Or,
Connect the cigar lighter female interface with the male
interface, and then connect the cable to the vehicle
terminal box.
Attention:
To power up the driver’s system with the terminal box, make sure
you connect the red line to the positive terminal, and the black line
to the GND terminal.
3.
Use the cable clamps to secure the cables, and paste the
clamps on the vehicle surface.
Notes:
Paste the clamps in correct place in once.
The large clamps are used for securing the aviation plug,
and the small clamps are used for securing the cigar lighter
and cables.
Side View
Top View
Cable Clamp
Sticker
