HIKVISION RA4 Series, User Manual, Page: 83 / 102

76 Camera Management
Configuring Video Loss Detection
Video loss detection can be enabled on any of the channels on your DVR to detect the loss of
video.
To configure video loss detection:
1. Enter the Video Loss Detection menu, shown in Figure 51 by going to Main
Menu > Camera Setup > Video Loss Detection.
Figure 52. Video Loss Detection Menu
2. Select the camera to setup video loss detection in using the camera drop down
menu on the upper left of the menu. If all cameras are to be configured with
the same settings, select
All Cameras from the list .
3. Click Enable Video Loss Detection .
4. Select Actions to take if video loss is detected. More than one action can be
selected per channel. These actions include:
•
Sound Audio Warning: DVR will sound an audio warning if video loss is
detected.
•
Pop-up Image on Monitor: DVR will show the corresponding channel
that is associated with the video loss channel.