HIKVISION RA4 Series, User Manual, Page: 69 / 102

62 System Configuration
motion detection area will include them into the region. You may also click the
Full Screen button to include the whole area into the motion detection region.
Left-clicking on any part of the grid will remove that section from the motion
detection region.
6. If you’re not satisfied with the selected region, you may click the Clear button
to reset the motion detection area.
7. Select the Actions to take if motion is detected in the designated regions. More
than one action can be selected. The actions available includes:
•
Sound Audio Warning: DVR will sound an audio warning if motion is
detected in the designated regions of the camera.
•
Pop-up Image on Monitor: DVR will show an image of what caused the
motion on the monitor.
•
Notify Surveillance Center: DVR will notify surveillance center when
motion is detected.
•
Send Email: DVR will send an email out to the designated recipients when
motion is detected.
•
Trigger Alarm Output: DVR will trigger alarm output when motion is
detected. Selecting this option will enable the Alarm Output list, where the
output to trigger can be selected.
8. Select the Save button to save the motion detection settings and select Exit to
return to the previous menu. Selecting the Exit button without clicking Save
will quit out of the menu without saving settings.