HIKVISION RA4 Series, User Manual, Page: 66 / 102

Configuring PTZ Cameras 59
To customize PTZ presets:
1. Enter the PTZ Configuration menu, shown in Figure 42 by going to Main
Menu > System Configuration > PTZ Configuration.
2. Select the On Camera Settings tab.
3. Select Save Presets and move the camera to the desired position using the
PTZ control buttons.
4. Double-click on a preset number in the upper left corner of the screen. The
current position of the PTZ camera will be set for the selected preset number.
5. To test the newly configured preset, first move the PTZ camera to a different
position. Select
Recall Presets and click on the preset number. The camera
should move to the location that was set for the selected preset number.
6. Click the Done button to exit out of the PTZ Configuration menu.
Note:
Only the first 23 presets are shown in the table. To save or recall more presets,
click on the “...” button. Clicking the “...” button will bring up a selection list for presets up to
200.
To customize PTZ patterns:
1. Enter the PTZ Configuration menu, shown in Figure 42 by going to Main
Menu > System Configuration > PTZ Configuration.
2. Select the On Camera Settings tab.
3. Select a Pattern Number to set from the drop down list.
4. Click the Record button to begin recording the movement of the PTZ.
5. Move the PTZ to the desired locations using the PTZ control buttons.
6. Click the Save button to save pattern.
7. To test out your new pattern, click the Play button. The PTZ should move as it
did during the recording process. You may click the Stop button at any time to
end the pattern. Clicking the Play button again will start playing the PTZ pat-
tern again at the initial position.
8. Click the Done button to exit out of the PTZ Configuration menu.
To customize PTZ patrols:
1. Enter the PTZ Configuration menu, shown in Figure 42 by going to Main
Menu > System Configuration > PTZ Configuration.
2. Select the On Camera Settings tab.
3. Select a Patrol Number to set from the drop down list.
4. Select a Preset Number that is next to the Patrol Number from the drop
down list that you would like to add to the patrol.