HIKVISION RA4 Series, User Manual, Page: 65 / 102

58 System Configuration
2. Select the On Camera Settings tab. This will open up the On Camera Settings
menu, shown in Figure 40.
Figure 40. PTZ Configuration Menu > On Camera Settings Menu
3. Select the camera to test in the camera drop down menu.
4. Using the Directional buttons and other PTZ control buttons (Zoom In/Out,
Focus In/Out, Iris In/Out), test the functionality of the PTZ camera. If PTZ
camera and protocol supports it, you may also click the Auto-Scan button to
test its function. PTZ controls buttons are shown in Figure 41.
Figure 41. PTZ Controls Button
5. If PTZ camera is not working properly, make sure PTZ is connected and con-
figured with the correct settings under the
Serial Settings tab.
6. Click Done to exit and return to the previous menu.
Customizing PTZ Presets, Patterns and Patrols
Your DVR allows you to customize presets, patterns and patrols for a connected PTZ
camera. A PTZ camera must first be configured before PTZ presets, patterns and patrols
can be customized (See
Configuring Basic PTZ Settings on page 57).
Directional Buttons
Auto-Scan