HIKVISION RA4 Series, User Manual, Page: 62 / 102

Managing User Accounts 55
•
Advanced Control: Manage hard disk drives (initializing and setting
properties for HDDs). Ability to remote update system firmware and stop-
ping of the relay output.
•
Live View: Access the Live Feed.
•
PTZ Control: Control PTZ cameras.
•
Configuration: Configure parameters, restore parameters to factory
defaults and import settings to as well as export settings from DVR.
•
Video Output Control: Configure settings for video output.
•
Alarm Control: Alert or control the relay output of the DVR. Alarm and
exception settings must be configured properly to upload to host.
•
Shutdown/Reboot: Shutdown or reboot the DVR.
•
Playback: Playback recordings remotely.
•
Camera Management: Enable and disable analog channels. Add and
delete IP cameras.
•
All: Full permission to use all functions.
5. Click the Save button to save user settings and click Done to return to the pre-
vious menu.
Note:
If you forget the password to your DVR, contact your supplier with the serial
number of your DVR to obtain a secure code to reset your DVR.
Note:
The password of the Admin user can be modified in the Lock Menus menu (See
Locking and Unlocking System Menus on page 91).
Deleting a User
To delete a user from the DVR:
1. Enter the Remote User Settings menu, shown in Figure 38 by going to Main
Menu > System Configuration > Remote User Settings.
2. Select a user to delete in the Remote Users List panel.
3. Click the Remove button to delete user.
4. Click the OK button to confirm deletion of user.
5. Click the Done button to exit menu.