HIKVISION RA4 Series User Manual Download Page 32 | Manualshive

Page: 32 / 102

HIKVISION RA4 Series User Manual Download Page 32

Watching a Live Feed

25

Figure 17. Enable Audio Error Window

•

Digital Zoom Mode:

Enable digital zoom on the selected channel. Once

enabled, the regular feed will be shown in the lower right corner while the
zoomed in view will be shown on the full screen. The zoomed in region may
be changed by moving the red rectangle in the regular feed window.

•

Full Screen Mode:

Enable full screen mode for selected display. To enable full

screen mode:

1.

Select display to enable full screen on.

2.

Click the Full Screen icon.

3.

Click the Exit Full Screen icon to return to normal display mode.

Using the Display Menu

The Display Menu can be accessed by right-clicking the mouse on any of the display in Live
Feed mode. The Display menu, shown in Figure 18 allows you to quickly change into
different display modes and to start/stop auto-switching of the display modes.

Figure 18. Live Feed Display Menu

«
...
30
31
32
33
34
...
»

Summary of Contents for RA4 Series







































































































Reviews:

No comments