HIKVISION RA4 Series, User Manual, Page: 18 / 102

Operating Your DVR 11
The keys on the remote control closely resembles the ones found on the front panel.
Referring to Figure 4, they include:
1. POWER Button: Same as POWER button on front panel (See page 6).
2. DEV Button: Enables/Disables Remote Control.
3. Alphanumeric Buttons: Same as Alphanumeric buttons on front panel (See
page 7).
4. EDIT Button: Same as EDIT/IRIS+ button on front panel (See page 8).
5. A Button: Same as A/FOCUS+ button on front panel (See page 7).
6. REC Button: Same as REC/SHOT button on front panel (See page 7).
7. PLAY Button: Same as PLAY/AUTO button on front panel (See page 7).
8. INFO Button: Same as ZOOM+ button on front panel (See page 7).
9. VOIP Button: Same as MAIN/SPOT/ZOOM- button on front panel (See page
8).
10. MENU Button: Same as MENU/WIPER button on front panel (See page 8).
11. PREV Button: Same as PREV/FOCUS- button on front panel (See page 8).
12. DIRECTION/ENTER Buttons: Same as DIRECTION/ENTER buttons on
front panel (See page 8).
13. PTZ Button: Same as PTZ/IRIS- button on front panel (See page 8).
14. ESC Button: Same as ESC button on front panel (See page 7).
15. RESERVED: Reserved.
16. F1 Button: Same as F1/LIGHT button on front panel (See page 8).
17. PTZ CONTROL Buttons: Buttons to adjust the iris, focus and zoom of a PTZ
camera.
18. F2 Button: Same as F2/AUX button on front panel (See page 8).
Aim the remote control at the IR receiver located at the front of the unit to test operation. If
there is no response:
1. Using the front control panel or the mouse, go into Main Menu> System Con-
figuration> Display Configuration.
2. Check and remember DVR device No. The default ID# is 255. This ID# is
valid for all IR controls.
3. Press the DEV button on the remote.
4. Enter the DVR ID# from step 2.
5. Press the ENTER button on the remote.
If the Status indicator on the front panel turns blue, the remote control is operating
properly. If the Status indicator does not turn blue and there is still no response from the
remote, please check the following: