Reference
Handover Form
Alarm Company:
Date of Installation:
Site Reference:
Engineer Name:
Engineer Contact Number:
Installed to Grade 2:
Yes / No
Environmental Class:
Other Comments:
SMS Commands
You can send SMS commands to the panel via your mobile phone.
All SMS commands must start with a valid User Code and are not case sensitive unless the
utilised outputs are activated. If an SMS command is not recognised, the panel will send an
‘incorrect command’ message back to you.
Example SMS command send
Description
Example SMS command
response
Arming via SMS text command
1234 Arm 0
1234 = User Code. Arm 0 = Will arm in
Areas 0
Final Arm; Area 0
1234 Arm ABCD0123
1234 = User Code. Arm ABCD0123 = Will
arm in Areas ABCD0123
Final Arm; Area ABCD0123
NOTE: If no areas are specified then all areas will arm (default).
Disarming via SMS text command
34
PCX User Guide
102017853 - V01