HIKVISION Pyronix Enforcer 64, User Manual

Page: 18 / 44

Configuration
Chime Feature
This feature can be setup by your installer and is most commonly enabled for doors using the
magnetic contact. When activated you will hear a ‘chime’ sound to alert you whenever the door is
opened.
To disable the chime on the panel or keypad, close all doors that chime and press the
c
key until 'c'
is no longer displayed on the screen.
Press the
c
key again to re-enable the chime.
PA from Keypad
If you require a PA (Panic Alarm), press and hold both the
1
and
7
keys or hold
p
for 2 seconds
(by default) and a 'PA' alarm will be generated.
The PA feature, and the length of time the buttons must be held for, must be enabled by your
engineer (silent or audible alarm options available).
Fire Alarm from Keypad
If you want to generate a fire alarm, perform one of the following actions:
• Press and hold both
3
and
9
for 2 seconds.
• Press and hold
f
for 2 seconds.
The fire alarm feature must be enabled by your engineer.
18 Enforcer User Guide 102017855 - V01