SNMP v3) to enable the feature.
3.
Configure the SNMP settings.
Note:
The configuration of the SNMP software should be the same as the settings you configure
here.
4.
Click
to save and finish the settings
Configuring FTP Settings
Purpose:
You can set a FTP server and configure the following parameters for uploading captured pictures.
Steps:
1.
Enter the FTP settings interface:
Configuration > Network > Advanced Settings > FTP
Figure 6-8
FTP Settings
2.
Configure the FTP settings, including server address, port, user name, password, and
directory.
Note:
The server address supports both the domain name and IP address formats.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
Setting the directory in FTP server for saving files:
Summary of Contents for PTZ Ultra Series
Page 1: ...Network Speed Dome User Manual...
Page 20: ...3 Visit the camera via the applied domain name...
Page 139: ...UD16002B...