HIKVISION PS-7104HQHI-SH User Manual Download Page 180

Page: 180 / 198

User Manual of Digital Video Recorder

179

12.4

Importing/Exporting Configuration Files

Purpose:

The configuration files of the DVR can be exported to local device for backup; and the configuration files of one

DVR can be imported to multiple DVR devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance > Import/Export

Figure 12. 6

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the import process is completed, you must reboot the DVR.

After having finished the import of configuration files, the device will reboot automatically.

Summary of Contents for PS-7104HQHI-SH







































































































































































































Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands

HIKVISION PS-7104HQHI-SH, User Manual

Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands