48
User Manual of PanoVu Series Network Camera
Figure 4-9 PTZ Configuration
2.
Click the PTZ control buttons to find a position as the initial position of the camera; you can
also call a defined preset and set it as the initial position of the camera.
3.
Click
Set
to save the position.
Call/delete an Initial Position:
You can click
to call the initial position. You can click
to delete the initial position and
restore the factory default initial position.
4.2.4 Configuring Park Action
Purpose:
This feature allows the camera to start a predefined park action (scan, preset, pattern and etc.)
automatically after a period of inactivity (park time). The park action function only takes effect in
Camera 1.
Note:
Scheduled Tasks
function is prior to
Park Action
function. When these two functions are set at the
same time, only the
Scheduled Tasks
function takes effect.
Steps:
1.
Enter the Park Action settings interface:
Configuration
>
PTZ > Park Action
Figure 4-10 Set the Park Action
2.
Check the
Enable Park Action
checkbox.
3.
Set the
Park Time
as the inactivity time of the camera before it starts the park actions.
4.
Choose
Action Type
from the dropdown list.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]