13
User Manual of PanoVu Series Network Camera
Save record files to:
Set the saving path for the manually recorded video files.
Save downloaded files to:
Set the saving path for the downloaded video files in
interface.
Picture and Clip Settings:
Set the saving paths of the captured pictures and clipped video files.
Save snapshots in live view to:
Set the saving path of the manually captured pictures in
interface.
Save snapshots when playback to:
Set the saving path of the captured pictures in
You can click
interface.
Save clips to:
Set the saving path of the clipped video files in
interface.
Note:
to change the directory for saving video files, clips and pictures.
3.
Click
to save the settings.
2.2 Configuring Network Settings
2.2.1 Basic Settings
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over network. IPv4 and
IPv6 are both supported.
Steps:
1.
Enter TCP/IP settings interface:
Configuration > Network > Basic Settings > TCP/IP
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]