HIKVISION PanoVu PT Series, User Manual, Page: 37 / 103

4.3 Set Patrol Scan
Patrol scan is a function to automatically move among multiple presets.
Before You Start
Make sure that you have defined more than one presets. See Set Preset for detailed configuration.
Steps
1. Click to show the setting panel, and click to enter patrol setting interface.
2. Select a patrol number from the list and click .
3. Click to add presets.
Preset
Select predefined preset.
Speed
Set the speed of moving from one preset to another.
Time
It is the duration staying on one patrol point.
Delete the presets in patrol.
Adjust the preset order.
Note
A patrol can be configured with 32 presets at most, and 2 presets at least.
4. Click OK to finish a patrol setting.
5. Repeat the steps above to configure multiple patrols.
6. Operate patrols.
Call the patrol.
Stop patroling.
Delete the patrol.
Set the patrol.
Note
You can delete all patrols in Configuration → PTZ → Clear Config . Click Clear All Patrols, and
click Save.
4.4 Set Limit
The device can only move within the limited range.
Target Capture Camera User Manual
28