background image

It is the speed of deciding whether an object in detection area is a target or not. The higher the

value is, the faster the target will be detected. The default value is recommended.

Sensitivity

It is the sensitivity of recognizing a target. The higher the value is, the easier a target will be

recognized, and the higher possibility of misinformation would be. The default value is

recommended.

Capture Parameters

Best Shot

The device captures the target picture with the highest score after setting the parameters.
Capture Times

It refers to the capture times a face will be captured during its stay in the detection area.

Capture Threshold

It refers for the quality of face to trigger capture and alarm. Higher value means better quality

should be met to trigger capture and alarm.

Remove Duplicated Faces

This function can filter out repeated captures of certain face.

Note

Remove Duplicated FacesFace Picture Comparison, and Face Modeling cannot be turned on

simultaneously, and the device can support only one function at a time. The last one you

turned on can eventually take effect, and the other two turn off automatically.

Similarity Threshold for Duplicates Removing

It is the similarity between the newly captured face and the picture in the duplicates

removing library. When the similarity is higher than the value you set, the captured picture is

regarded as a duplicated face and will be dropped.

Duplicates Removing Library Grading Threshold

It is the face grading threshold that triggers duplicates checking. When the face grading is

higher than the set value, the captured face is compared with the face pictures that are

already in the duplicates removing library.

Duplicates Removing Library Update Time

Every face picture is kept in the duplicates removing library for the set update time.

Quick Shot

The device captures the target picture once the score of the captured face exceeds the Quick

Shot Threshold during the Max. Capture Interval. Otherwise, the device selects and uploads

the picture with the highest score during the Max. Capture Interval.
Quick Shot Threshold

Target Capture Camera User Manual

12

Summary of Contents for PanoVu PT Series








































































































Reviews: