User Manual of PanoVu Series Network Camera
92
Figure 6-28
Draw Area
4)
Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
5)
Click
to save the settings.
4.
Click Save to save the settings.
5.
Click
tab to enter the arming schedule setting interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection. Refer to Step
5 in Section 6.1.1 Configuring Motion Detection.
6.
Click
tab to select the linkage method taken for the video loss alarm, Notify
surveillance center, send email, upload to FTP, trigger channel, smart tracking and trigger alarm
output are selectable. Refer to Step 3 in Section 6.1.1 Configuring Motion Detection.
7.
Click
button to save the settings.
6.3.4
Advanced Configuration
Purpose:
The following contents are about how to configure the parameters of behavior analysis algorithm.
Steps:
1.
Enter the Advanced Configuration interface:
Configuration > Behavior Analysis > Advanced Configuration
2.
Adjust Parameters.
Restart VCA: Click Restart to restart the VCA function.
3.
Global Size Filter
Global Size filter is valid for all panoramic channels. Targets larger or smaller than the set size range
are filtered out.
Steps:
1)
Enable Global Size Filter.
2)
Click
and draw a max size frame on live image.
3)
Click
and draw a min size frame on live image.