HIKVISION MV-CA003-20GC, User Manual, Page: 67 / 91

User Manual of Area Scan GigE Camera
67
Table 3-4 White Balance Status Introduction
Status Description
OFF
MBW mode: You can adjust the R, G, and B gain value manully. The
adjustable range is 1 to 4095, 1024 means the ratio is 1.0 .
ONCE
Adjust the white balance value according to the current scene and the
adjustment stops automatically after a while. The adjustment adopts a algrithm
that looks for the gray blocks in the Bayer data.
Note: The white balance adjustment is only available in color models.
Click Analog Control in the attribute list. Click Balance White Auto and Balance
Ratio Selector. Select available white balance status parameter and finish setting, as
shown in Figure 3-38.
Figure 3-38 White Balance Setting
3.9.4 Region Setting of Auto Functions
The camera can adjust exposure time and white balance automatically to achieve your
expectations. By default, the camera will adjust the brightness and the white balance
of the whole image. In addition, you can also set an area of interest, which is called
AOI. The camera will adjust the AOI in the image. And the area outside the selected
region will also be changed.