Figure 2-4 Exit Button Wiring
Note
Terminal BTN1/BTN2 can both connect to exit button.
2.2.4 External Card Reader Wiring
Note
• Please set the DIP switch first before connecting the card reader.
• If the DIP switch should be configured when the card reader is power-on, please
reboot the card reader after configuring the DIP switch.
• The DIP switch description is shown in the following table:
Table 2-2 DIP Switch Description
No.
Description
How to Configure
1 to 4
Set the RS-485 address
ON: 1
OFF: 0
6
Select Wiegand protocol or
RS-485 protocol
ON: Wiegand
Video Intercom D Series Door Station User Manual
8
