High Performance Event Detection Server • User Manual
7
Chapter 2 Getting Started
Start Up and Shut Down
Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Start Up
Before you start:
Fix the device in an equipment cabinet.
Ensure the device is properly grounded.
Plug the network cable.
Plug the power supply to start up.
Make sure the power supply is plugged into an electrical outlet. It is highly recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
Shut Down
Unplug the power supply to shut down.
Set Admin Password
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP or
Client Software.
Before you start:
Set the IP address of your computer. Make sure the device is in the same network segment with
your computer.
Enter device IP address in address bar of the browser and press Enter. Thus the activation
interface pops up.
Enter the Admin Password and Confirm Password.
